My phone still doesn’t know what fuck means or suggests it to me when I want to write it even though I use it fairly often. I also daily greet my coworkers over threema and it still hasn’t learned what I want to write when my sausage fingers and the too smal keyboard are at a disagreement what should be written.
Depends. I recently was in that situation and it was easier and more cost-effective to just print them.
I recently bought some Lego Star Wars sets and printed out some Display stands for them but the connection between the stands and the model was expected to be a 2x4 Lego plate. I didn’t have those plates at hand so I looked online and found it from the official Lego site.
The individual “Plate 2x4” would cost 0.14EUR each. Since I needed 3 this would be 0.42EUR. But the mailing costs would be over 9EUR.
So ordering 3 of those Lego pieces would cost me almost 10 bucks. I just printed them out which worked well, they were a bit tight fit but are still holding.
But I wouldn’t necessarily say that this is a replacement for actual Lego pieces. As a quick alternative that you can’t see or that has less interaction with other pieces (doesn’t need to fit correctly on all sides) then I think this can work.
so, sooo much.
I currently print some stands for some Lego spaceships. I also have over a TB of models from various Patreons that I support accumulated over the months. I also always find new ones I want to print, but rarely find the time to ACTUALLY print something, anything…
Unraid “supports” docker compose. You can install and use it but you won’t be able to utilize how unraid handles docker containers.
All that unraid does is make docker more accessible for the normal user. In the end the container template constructs a docker run command.
So you could use portainer to manage stacks through a webui or install compose and have to SSH into the unraid server all the time.
While this would be funny to watch, it wouldn’t help Linux at all, quite the opposite actually because many have the impression of Linux in exactly that way.
So something like this would have to have a huge asterisk and constant clarification that this is “not the general state of Linux”
I had the pleasure recently to create an ffmpeg command to transcode a video into HEVC 10bit with quicksync.
I had tha previously running completely fine on my Nvidia GPU. You would think that it would just be replacing the parameter which device or hardware acceleration to use.
Yeah, turns out that there are like 4 ways to set the quality value of the transcoded output, CRF didn’t work for some reason with quick sync so you need to use global quality or something. I spend days on this trying to figure this out, DAYS.
It is a very powerful tool but every time I have to use it, it is too complicated and I have to spend hours or days to get it working.
If you look at your library it shows you what they currently use and you can even set which you want as default.
yeah, can’t say that this is the case. Since the Metadata Agent would be responsible for requesting and adding metadata to your library items it would be set to the Official Plex Metadata Agents, since this is specifically for Movie Artworks, this would then only apply to the Plex Movie Metadata Agent.
But nowhere is any mention of where that metadata is coming from. Since I already wrote my own Metadata Agent and have some experience with it I know that the metadata is coming from watch.plex.tv as the metadata aggregator. I also know that movie-related Metadata is coming from TheMovieDB or IMDB.
You can specifically define that you want metadata from any of the sources if your “force match” the related source through the {tvdb-110381} on your folders. But not in the agent settings itself.
For TV Shows this is somewhat different because you can specifically select the Episode ordering to either TVDB or TMDB. By default, and from my tests, everything is coming from TheMovieDB unless otherwise specified.
I am curious where you did see that…
But, again, the point is to make this more clear what the origin is because I have had multiple instances in which I had to do some detective work telling a user where that incorrect metadata is coming from because all they see is some wrong metadata in their library that someone maliciously changed on on TVDB, IMDB or TMDB.
Would have been nice to say what “new primary metadata source” that is because you can’t really distinguish where everything is coming from anyway and just have to guess or ask on Reddit/lemmy. Is that now a completely new metadata source, do they now prefer TheMovieDB or maybe IMDB?
Why did I read that with the David Attenborough voice in mind?
Polygon surveyed more than 4,000 people
That isn’t that many people. This is like 0.04% of the people subscribed to the r/anime subreddit. and just 2.5% of the number of visitors of an anime convention in my country.
Yeah. The general speed that you set isn’t necessarily the speed that your printer will print at. That might be the max speed you might get in the best situation or location.
For example, depending on the settings, first layer, outer walls, bridges and other parts of the model cann all be printed at a lower speed to preserve quality. Your print head also needs to accelerate and decelerate for every corner so that it doesn’t overshoot and go where it should. So low acceleration/deceleration play also a part. And the model itself has to be considered in this too because long, mostly straight lines can accelerate to that speed and stay on it for longer.
So what you set as “speed” in the slicer is mostly not what you actually get. Some slicers have a speed display with a colour gradient after you sliced it so that you can see which parts are faster or slower.
The only thing you can really do about it is to do test prints and slowly push the speed up as far as you can to get a decent quality at a nice speed. But you can still end up in parts where you would be fairly slow.
What audio problem? because I had issues with my surround sound in which the channels where jumping all over the place. Support wasn’t much help and if that was the same problem then I wish I had found that sooner
So this is just for the “looks” or am I missing something here?
Doesn’t seem to do anything for adhesion which I wouldn’t consider to be a replacement as the title implies it is…
Unless, of course, you are looking for a different bottom surface finish.
Yes, blind optimism is the way to go here. /s
I am sorry but if any gaming journalist is not the least amount of sceptical about ANY release today, then they either don’t play games or are sleeping under a rock.
Without a doubt, Hello Games pulled NMS around and made it into a great title but this took years and we also have seen this blind optimism before with Cyberpunk 2077. Even a “wiser” Game studio can fail and not deliver.
Too many titles over the last years were lukewarm even highly anticipated and hyped titles either were “meh” or failed at release. The number of games that redeemed themselves is only a few and can be probably counted on one hand. A gaming Journalist should know about this!
So, I am not even sorry if I am not hyped about it. It does sound interesting but “I believe it when I see it”. There is too much time that has to go down the road for this to come out and there are a lot of things that can/will go wrong in that time.
I rather wait on the reviews.
Just vote with your wallet
But that is the thing, they do vote with their wallet. They still buy the games.
“Voting with the wallet” goes both ways.
I am pretty sure I have disabled this as well but I am not sure about the “set everything to private”. I know I have seen this recently but I cannot find it anywhere so it isn’t that easy to find, at least for me right now.
On the other hand, even if I would set that family and friends could see my watch history, I would still have to have some assumptions about what is shared and what is not and how that is being accessed. There is a huge difference between “they can see everything that I have watched regardless of whether they have access to the library or not” and, more importantly getting notified about what I have watched or they have to go to some UI element or browser to see what a user has played.
Probably get devoured by a Titan (Attack on Titan)
I think the biggest problem that people have with NGE is that it just isn’t your typical shounen anime. All of the characters behave in a way because of their past experiences. Shinji being abandoned by his father, witnessing his mother’s death without actually understanding or realising it, asuka being neglected by her mother and Rei being a clone. And all of them in their teens, in a broken world getting told to fight and probably die or humanity is doomed.
With how saturated anime are with flawed main characters that then use that flaw to their advantage to overcome their enemy, NGE just doesn’t do that.
I think that viewers just expect this hero story when they watch it.
I mean. I had a similar impression when I first watched it a long long time ago and thought that shinji was a wuss. But that was after I watched the typical shounen, DB, DBZ, Naruto and bleach. Not to mention that I didn’t understand what the fuck was going on. Only later after watching it a second time and digging into the background a bit, shinjis Oedipus complex, asukas hedgehog dilemma and the general motivation of each of the characters it made a lot more sense. Including the context of their situation made me appreciate the storytelling a lot more because it put everything into perspective.