![](/static/66c60d9f/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/e4083c7c-83c3-4258-8370-708e95e309b3.png)
“fill angle” under infill settings.
“fill angle” under infill settings.
Yep. I can get ASA down to 12% with an ambient 50%RH using that method.
There are some models out there for wedges with reverse Bowden fittings so you can keep it cracked open all the time.
USB 5V power can be equally noisy, even from a powered hub, so that argument doesn’t make any sense. PCIe has a high current 12V rail available that has much more margin than USB for filtering with an LDO and run your signal chain well above the noise floor of the components.
Besides, Asus Xonar as in the picture can take 12V from a drive connector to bypass the motherboard PCIe 12V “just in case”.
Try running your dryer with the lid propped open a bit. Most Sunlu dryers don’t have a way to get rid of the humid air pulled out of the filament.
Next week: Fedora meets a new friend named Lennart while on her way to Multiuser Mountain. Will they be able to cross the init bridge without being caught by Sammy the Systemd Hating Troll?
Also Professor Charles Javier
J E N O V O
You’re gonna carry that weight
Up until a few years ago there was a local urologist named Richard Chop, and Dr. Peter Ruff is still seeing clients. Nominative determinism is a thing.
PLAYERS: 0
Problem solved.
Most GHz RF designs are a PCB with a bunch of copper sigils and a single transistor.
So say we all.
Except for that time it was CPE-1704-TKS
V.35 or IEEE-488
Nah, this is Apple. It’s got to be the most expensive: Lemo medical grade.
N connector to SMA, and hardline to USB-C.
$ :|wc -c 0 $ touch /tmp/f; :>>/tmp/f; wc -c /tmp/f 0 /tmp/f