Don’t have the max version but I believe they shared the same extruder as cr6 se
This video shows how to put it back together https://www.youtube.com/watch?v=adVzvhmIKZM
And they are several option to replace extruder. Cheap one are the same compatible of ender 3 like this one at 4€ https://a.aliexpress.com/_EyXIa19 but you will have to print a raiser for the filament sensor
You’re welcome ;)
On your Xiaomi first time you launched app, you can determine wether you always allow or allow on prompt (but you should still be able to manage that setting afterwards). You also need to disable battery optimization for that app and set app to be able to auto launch in background. This is at least what I do with my home assistant app to determine GPS location in background (app record every 15mn) and no issues with battery draining.
So pc is consuming 13W, this is with one nvme + one SSD, pic at 30w for a few seconds at boot.
Curious, might have same machine but do consume a bit more, do you have one SSD + one nvme?
It is a beelink mini s12 pro https://www.bee-link.com/beelink-mini-s12-pro-n100-mini-pc-clone-1
Do also have a n100 processor running proxmox with 3 VM. Can’t try right now but can come back in a few days to let you know how much power it draws
Not OP but have a question if you don’t mind as I just swapped to Klipper and everything isn’t clear yet.
When you say “due to lack of power…” isn’t klipper doing all the work meaning that board don’t need to process anything and is basically in a “reader” state?
Exactly, neither fit right for an AI
Think it depends the language, in french gpt is very very close to “j’ai pété” which means “I farted”. But, yeah agree that Claude ain’t much better name
My bad, misread as I understood that you spend last decade fixing each part. As I said ender 3 from something around 2018-2019 were very great for the price but maybe quality has decreased since. Might be better choice today
How did you manage to get an ender 3 10 years ago while they were launch around 2018 😂. Wild guess is that you didn’t mount it with care, which often end up with countless issues and blaming printer part is easy. If it was such a bad printer, you would not encounter printers farm using it.
It was definitely not a plug and play printer (they were not any at that time), but you could/can achieve same quality print as a thousand €/$ printer, the worst thing on it was his plastic extruder (10€ and 10 minutes to replace it), and the best thing on it is that you can customise it to your wish unlike any other printer and this was due to the vast amount of people who loved it. I still have an old 3 pro and it is rock solid, I sometimes don’t use it for a whole year but each time I plug it back, i only clean and level the bed and it is good to go. (as I have a cr6-se which is also awesome by the way)
That being said, I can’t tell how the most recent ender 3 versions does as I have only tried ender 3, 3 pro and 3V2.
If z2m, zwavejs,… Are installed from the adon store of HA, all you have to do is create a full backup of HA, and all your automations will be saved and restored automatically.
“do we straight up invade… like we did…” Do you know the mess that actually comes from there? And How much it had enforced extremist behaviour in other countries.
“What US needs to do?” Start by taking care of your own issues like guns, they will inevitably end up in dark market serving cartels and others, it would also stop massive killing happening in your own country at the same time… Priorities to education and healthcare, Stop invading countries (can’t remember last US invasion which was actually useful…), start supporting smart guys instead of bad/extremist guys so they don’t get more powerful (exemple: Masoud instead of Bin Laden in Afghanistan against Russia).
Professional printing services are usually expensive, might be better to buy a second hand printer if you already plan to get one. Don’t know the market in Japan but I guess they will charge you much more than 50€ and you can get a second hand printer which originally cost 400€ for maybe 150-200€.
Unlike a 1000€ printer, you will have a learning curve but you can get as good looking print as a 1000€ printer. Main difference is plug and play (yet still have to learn slicer settings and how each settings interact with each others) and printing speed.
Also, while you may choose from printing services what material to use, I ain’t sure you can tell them what settings to use. As they are a printing services, you shall only tell them what those stl are used for and they should adapt according to their knowledge because they are much more than filling to take into account like walls, infill type, layer thickness, printing speed, print orientation…
Pla should be fine except maybe for the part that goes around the cylinder (depending force that is applied to it and thickness of part). In this case, petg or abs might be better
Instead of printing services, another possibility is to check the different fab lab in Tokyo, contact them and see what they offer.
I cannot see images (“these”), but if you are talking about some wheels, yes they should not be too tight neither too loose. Once tightened you should be able to turn them with your fingers without raising gantry but you should also feel friction.
This might help you to choose https://github.com/meichthys/foss_photo_libraries
This might help
https://imgur.com/a/9faZx36
Actually home assistant made it happen this year https://www.home-assistant.io/blog/2022/12/20/year-of-voice/
Relying on 4 nvme drive for low power isn’t ideal as nvme drive needs about twice more power compare to sata SSD.